Windows are very frequently a source of lost heat in your home. Older homes may suffer from only having single-paned windows, which lose a large amount of heat, and even newer double-paned insulated windows lack enough insulation against cold winter temperatures and wind. However, you can save home heating costs and easily bulk up the insulation around your windows by making your own inexpensive thermal curtains.
Thermal curtains are energy-efficient window shades* that insulate against the cold around your windows. They are a thick and heavy buffer and can significantly decrease the money you spend on energy to heat your house. If you are handy with a sewing machine or know someone who is, there’s not much more you need than some old blankets or comforters, fabric, and a fair amount of time.
How to make thermal curtains
Old comforters make for a great filling in thermal curtains, especially since they can be had for very cheap ($5-10) at your local thrift store. Get a few of them. Doubling the comforter will increase the insulative value and add weight to keep your curtains pressed tightly against the wall.
Measure your window and find something strong and solid (imagine a rigid dowel or heavy stick) to span the bottom of the window to give your curtain some structure (and to make it easy to roll up and down).
You can use just the comforter itself for the curtain if you are looking for a very quick and dirty solution, or you can pick out some fabric to be sewn over the material for a more pleasing aesthetic.
Pinning the thermal curtain fabric
Cut your fabric a couple inches larger than the actual window measurements. To make cutting your fabric easier, place the two pieces of fabric with the fronts facing each other and your comforter layer(s) all in one pile and cut them simultaneously. Be sure to pin them together to keep them from shifting while you cut and then sew the fabric together.
Next, sew the materials together on three sides. On the final fourth side, sew about 1/3 of the length from each corner, leaving an unsewn portion in the center. Use the hole that you left unsewn to flip the curtain right side out. Then place your dowel or heavy stick between the layer of fabric and comforter at the bottom of the curtain. Finish the curtain by sewing your hole shut.
You can use a variety of methods to actually hang your new thermal curtains. You can sew velcro to the top back side, or sew small fabric loops on the top and hang the curtain from hooks mounted on the window frame. Be creative.
Thermal curtains are a cheap and easy way to save energy costs in your home. They can largely be made with reused and recycled materials.
Roll them down on cold winter nights, or even during a hot summer day to block the sun’s rays and save energy costs!
Looking for other ways to save energy around the house? Check out our selection of energy efficient lights.
*link to a page in the sustainablog Green Choices store
{ 1 trackback }
{ 4 comments… read them below or add one }
I haven’t done a stitch in a while, but I’m sure my wife won’t mind sewing one of these for our house. We had a terrible winter, and couldn’t help but keep the heater on for most days, and nights especially. I was telling her that we need to do something non-electrical to help rid of the cold next winter. This will be on the list. Thanks for sharing!
These are a quick method of creating Warm Window curtains, which are Roman shades (pull up accordion style) using a multi-layered fabric manufactured by the Warm Company. I sewed these curtains for our entire house, including skylights (over 29 openings!). We noticed immediately that our fuel usage dropped to about a third of what it is (even with dual-glazed windows).
Window coverings seem to be one of the most ignored ways to insulate the home — and windows are a major source of heat loss. The Warm Window fabric has polyester batting, pinhole mylar and polyester, silvered mylar (a moisture barrier). The main thing is that they take time to sew. But oh they’re sure owrth it.
You can get the silvered mylar, or emergency blanket from Edmund Scientific. I made curtains as per the directions above, using drapery fabric, quilt batting, and the emergency blanket in layers.
Nice post. I was kinda skeptic about the idea of energy saving curtains. But its now a really simple thing to do